Click on the image to check the artwork
Air Purifier Filter Media For Air Purifier Filters
1. Product Introduction
H13 melt blown, with substrate without carbon for air purifier filters. High efficiency, but low pressure drop. This product is over 10000mg per square meter in CCM, is 10% higher than other suppliers. And also, it is mostly used in the market, like Phillips, Midea, Gree, etc. The raw material is polypropylene with competitive price. And also, we can laminated with carbon, for filtering formaldehyde, NH3, SO2, O3, smoke.
2. Product Parameter (Specification)
ITEM |
UNIT |
DATA |
STANDARD |
Weight |
g/m2 |
120±10% |
ISO9073-1-1989 |
Thickness |
mm |
0.7±10% |
ISO9073-2-1989 |
Air permeability |
L/m2*s |
≥600 |
GB/T5453-1997 |
Bursting strength |
N |
/ |
ISO9073-4-1989 |
Tensile strength |
N/5cm |
/ |
ISO9073-4-1989 |
Pressure drop |
Pa |
≤35 |
32L/MIN, @0.3μm |
Filtration efficiency |
% |
≥99.97 |
32L/MIN, @0.3μm |
3. Product Details
4. Advantages
Skillful sales team, 24-hours on line;
About 17 years focus on filter materials, we accumulated quite a lot of experience, knowledge, and market information.
24-hours on line for any demand.
5. FAQ
Q: Are you a trade company or manufacturer?
A: We are a manufacturer. Currently, we have two factories, one in Jiangsu, near shanghai, another one in Dongguan, Guangdong.
Q: Can you send free samples?
A: Yes, no issue. Generally, within 30M2 is free.
http://www.yimaofiltermedia.com/